Card found : F03C2EF2 , v0165
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.07

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]

SPRD mode : SC6531 : REV : E000 : NOR : [ 4MB ]

Operation : Read Flash [ v1.07 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ... 

Device Connected!
ERROR : Protocol HandShake failed!

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Read Flash [ v1.07 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ... 

Device Connected!
ERROR : Protocol HandShake failed!

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Read Flash [ v1.07 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Read Flash Ok, Size : 4.00 MiB

Version: 6531EFM_XE11_JFT_2162_MAXIMUS_M87_V02_20201120
Project Version:   SC6531EFM_BAR
MMI Version:       SC6531EFM_BAR
BASE  Version:     BASE_SVN
HW Version:        SC6531EFM_BAR
12-11-2020 10:34:59
LOG Version:      V1.0.1
Saved to : C:\Users\arifi\Desktop\mph\Version: 6531EFM_XE11_JFT_2162_MAXIMUS_M87_V02_20201120.bin

Done!
Elapsed: 00:00:46

Reconnect Power/Cable!

Download